Practice Modulus Of Sub-grade Reaction (29.1.1) - Rigid pavement design

Practice: Modulus of sub-grade reaction

Lesson 29.1.1Rigid pavement design

Practise this section

8 questions

Flashcard drill
3 cards from this section. Quick, good the night before a test.
Exercise
6 questions · about 4 min · pass mark 70%. Hints available.
Sign up to start the exercise
Quiz
2 questions · about 1 min · pass mark 70%. Hints available.
Sign up to start the quiz

6 sample questions

Question 1.
What is the modulus of sub-grade reaction?
Show hintHide hint
Think about how soil reacts to weight.
Question 2.
At what deflection value is the modulus of sub-grade reaction typically calculated?
Show hintHide hint
It's a small value that represents slight bending.
3Question 3.
What does the modulus of sub-grade reaction measure?
- The thickness of the slab
- The pressure per deflection
- The total weight of the pavement
Show hintHide hint
Focus on what K represents in rigid pavement analysis.
4Question 4.
True or False: A higher modulus of sub-grade reaction allows for a thinner pavement.
- True
- False
Show hintHide hint
Consider the relationship between support and thickness.
Question 5.
In a pavement project, a soil survey indicates a sub-grade with a modulus of 50 kg/cm³. If a standard load of 10,000 kg is applied at a deflection of 0.2 cm, calculate the pressure applied and discuss the implications on pavement design.
Show hintHide hint
Break down the formula.
Question 6.
Analyze a situation where increasing the modulus from 30 kg/cm³ to 60 kg/cm³ allows for a thinner slab. If the original design was 20 cm thick, how much could this thickness be reduced while maintaining structural integrity?
Show hintHide hint
Think about the balance of support and deflection limits.

4 more questions in this section. Enroll free to practise them all.