Practice Errors In Total Station Measurements (3.3.10) - Smart Stations

Practice: Errors in Total Station measurements

Lesson 3.3.10Smart Stations

Practise this section

10 questions

Flashcard drill
3 cards from this section. Quick, good the night before a test.
Exercise
6 questions · about 4 min · pass mark 70%. Hints available.
Sign up to start the exercise
Quiz
4 questions · about 3 min · pass mark 70%. Hints available.
Sign up to start the quiz

6 sample questions

Question 1.
What is circle eccentricity error?
Show hintHide hint
Think about the position of the measuring circle and its intended center.
Question 2.
Name one environmental factor that can affect Total Station measurements.
Show hintHide hint
Consider how temperature variations can influence readings.
3Question 3.
What type of error results from misalignment between the mechanical axis and the measuring circle?
- Pointing Error
- Collimation Error
- Circle Eccentricity Error
Show hintHide hint
Consider what misalignment affects the reading itself.
4Question 4.
True or False: Compensating for errors involves taking measurements from one side of the instrument.
- True
- False
Show hintHide hint
Think about whether one measurement is sufficient.
Question 5.
If a Total Station consistently shows an angle reading that is 15 degrees off from a verified test, outline the steps you would take to calibrate and identify potential causes for this error.
Show hintHide hint
Consider what conditions could influence accuracy before and after you test.
Question 6.
You are tasked with measuring a site with uneven terrain that occasionally disrupts line-of-sight. What practical methods can you apply to ensure data accuracy?
Show hintHide hint
Think about how to gather accurate data despite visual obstructions!

6 more questions in this section. Enroll free to practise them all.