Practice Errors In Theodolite Observations (1.18.10) - Plane Tabling - Surveying and Geomatics

Practice: Errors in theodolite observations

Lesson 1.18.10Plane Tabling

Practise this section

8 questions

Flashcard drill
2 cards from this section. Quick, good the night before a test.
Exercise
6 questions · about 4 min · pass mark 70%. Hints available.
Sign up to start the exercise
Quiz
2 questions · about 1 min · pass mark 70%. Hints available.
Sign up to start the quiz

6 sample questions

Question 1.
What is a common error you might encounter when setting up a theodolite?
Show hintHide hint
Think about the physical setup of the instrument.
Question 2.
What does averaging readings accomplish in surveying?
Show hintHide hint
Consider how different readings can differ due to various factors.
3Question 3.
What is one way to minimize errors in theodolite observations?
- Switching the face
- Using a longer tape
- Reducing the staff height
Show hintHide hint
Consider how changing direction can correct some observational issues.
4Question 4.
True or False: Always assume any single reading from a theodolite is correct.
- True
- False
Show hintHide hint
Think about how you check for errors.
Question 5.
The readings taken from two vernier scales were 40.0° and 40.2°. What adjustment would you make, and what is the corrected value?
Show hintHide hint
Think about how averaging helps eliminate discrepancies.
Question 6.
During a session, you realize that an error was present in collimation due to the misalignment of the telescope. Outline the steps to correct this error.
Show hintHide hint
Consider the initial steps you take when setting up your equipment.

4 more questions in this section. Enroll free to practise them all.