Practice Transition Curves (2.6) - Linear methods of setting out curves

Practice: Transition Curves

Lesson 2.6Linear methods of setting out curves

Practise this section

9 questions

Flashcard drill
5 cards from this section. Quick, good the night before a test.
Exercise
6 questions · about 4 min · pass mark 70%. Hints available.
Sign up to start the exercise
Quiz
3 questions · about 2 min · pass mark 70%. Hints available.
Sign up to start the quiz

6 sample questions

Question 1.
What is the primary purpose of a transition curve?
Show hintHide hint
Think about how vehicles adjust speed while turning.
Question 2.
Name one type of transition curve.
Show hintHide hint
There are three main types discussed.
3Question 3.
What is a primary characteristic of transition curves?
- They are always circular
- They gradually change curvature
- They only exist in highways
Show hintHide hint
Focus on the defining aspect of the curve.
4Question 4.
True or False: Super-elevation decreases the centrifugal force on vehicles turning in a curve.
- True
- False
Show hintHide hint
Think about the effects on vehicle movement.
Question 5.
Design a transition curve that satisfies the following conditions: start with zero curvature, gradually increase to a specified radius, and provide full super-elevation by the end. Specify the equations used.
Show hintHide hint
Focus on how curvature and elevation change.
Question 6.
Calculate the required length of a transition curve if a vehicle traveling at 50 km/h needs to change direction into a circular curve with a radius of 200 meters, including necessary safety margins.
Show hintHide hint
Think about the speed and curve radius relation.

5 more questions in this section. Enroll free to practise them all.