Practice Procedure For Analysis (2.9.1) - Theory of Structures

Practise this section

8 questions

Flashcard drill
2 cards from this section. Quick, good the night before a test.
Exercise
6 questions · about 4 min · pass mark 70%. Hints available.
Sign up to start the exercise
Quiz
2 questions · about 1 min · pass mark 70%. Hints available.
Sign up to start the quiz

6 sample questions

Question 1.
What do you need to calculate to start analyzing forces in a beam?
Show hintHide hint
Think about balancing forces.
Question 2.
True or False: A cantilever beam requires you to calculate support reactions.
Show hintHide hint
Consider the beam's free end.
3Question 3.
Which of the following methods is used to calculate support reactions?
- Moments Method
- Equilibrium Equations
- Force Summation
Show hintHide hint
Think about balancing forces in physics.
4Question 4.
True or False: The shear force at the left end of the beam is always zero unless a concentrated load is applied there.
- True
- False
Show hintHide hint
Consider initial conditions for beams.
Question 5.
A cantilever beam of length 10m with a point load of 200N at its free end. Calculate support reactions and the bending moment at the fixed support.
Show hintHide hint
Use equilibrium and moment calculations.
Question 6.
Draw the shear force and bending moment diagrams for a simply supported beam with a distributed load.
Show hintHide hint
Identify points of loading changes.

4 more questions in this section. Enroll free to practise them all.