Practice Shear Force And Bending Moment Diagrams (4.3) - Shear Force and Bending Moment Diagrams - part b

Practice: Shear Force and Bending Moment Diagrams

Lesson 4.3Shear Force and Bending Moment Diagrams - part b

Practise this section

9 questions

Flashcard drill
3 cards from this section. Quick, good the night before a test.
Exercise
6 questions · about 4 min · pass mark 70%. Hints available.
Sign up to start the exercise
Quiz
3 questions · about 2 min · pass mark 70%. Hints available.
Sign up to start the quiz

6 sample questions

Question 1.
What is a shear force?
Show hintHide hint
Think about how forces can act along the length of a beam.
Question 2.
Define a free-body diagram.
Show hintHide hint
Consider what you'd need to show all acting loads.
3Question 3.
What defines a statically determinate frame?
- More than enough equations to solve all unknowns
- Exactly enough equations to solve all unknowns
- Not enough equations to solve all unknowns
Show hintHide hint
Think about balance in solving equations.
4Question 4.
True or False: The moments on bending moment diagrams are always shown on the tension side of members.
- True
- False
Show hintHide hint
Recall the convention used in these representations.
Question 5.
Design a beam for given loading conditions: include calculated support reactions, shear forces, and bending moments across its length.
Show hintHide hint
Focus on summing forces in both directions.
Question 6.
Given a complex frame structure with multiple loads, analyze and predict how displacement varies due to bending moments.
Show hintHide hint
Consider the maximum moment locations.

5 more questions in this section. Enroll free to practise them all.