Practice Relating Torque And End-to-end Rotation (6.1) - Recap

Practise this section

8 questions

Flashcard drill
3 cards from this section. Quick, good the night before a test.
Exercise
6 questions · about 4 min · pass mark 70%. Hints available.
Sign up to start the exercise
Quiz
2 questions · about 1 min · pass mark 70%. Hints available.
Sign up to start the quiz

6 sample questions

Question 1.
What is torque?
Show hintHide hint
Think about the turning effect of a force.
Question 2.
Define axial strain.
Show hintHide hint
Consider how materials stretch under tension.
3Question 3.
What is the key relationship between torque and end-to-end rotation?
- Torque is unrelated to rotation.
- Torque leads to end-to-end rotation.
- End-to-end rotation occurs randomly.
Show hintHide hint
Relate torque to its mechanical effects.
4Question 4.
True or False: Axial strain only occurs under compressive loads.
- True
- False
Show hintHide hint
Think about how materials behave in different loading scenarios.
Question 5.
A hollow aluminum cylinder has a radius of 0.5 m and is subjected to a torque of 200 Nm. Calculate the angle of twist if the polar moment of area is 0.02 m^4.
Show hintHide hint
Pay close attention to the units while calculating.
Question 6.
A hollow cylinder is subjected to an axial tensile force of 1000 N and has an axial strain of 0.002. Calculate the Young's modulus if the cross-sectional area is 0.005 m^2.
Show hintHide hint
Break down the formula into parts to simplify your calculations.

4 more questions in this section. Enroll free to practise them all.