Practice Failure Modes And Effects Analysis (fmea) (35.2.2)

Practise this section

10 questions

Flashcard drill
4 cards from this section. Quick, good the night before a test.
Exercise
6 questions · about 4 min · pass mark 70%. Hints available.
Sign up to start the exercise
Quiz
4 questions · about 3 min · pass mark 70%. Hints available.
Sign up to start the quiz

6 sample questions

Question 1.
What does FMEA stand for?
Show hintHide hint
Think of how engineers analyze potential failures.
Question 2.
Describe one step in the FMEA process.
Show hintHide hint
Consider what needs to be recognized first.
3Question 3.
What does FMEA stand for?
- Failure Mean and Effects Analysis
- Failure Modes and Effects Analysis
- Fault Modes and Effects Analysis
Show hintHide hint
Consider the terminology we covered.
4Question 4.
True or False: RPN is calculated only based on severity.
- True
- False
Show hintHide hint
Remember the three aspects involved.
Question 5.
Design an FMEA table for a simple electric toaster. Identify at least three potential failure modes and their corresponding severity, occurrence, and detectability ratings.
Show hintHide hint
Think about the common issues that could go wrong with an appliance.
Question 6.
Your autonomous drone is facing a potential failure mode related to loss of communication. Describe the steps to analyze this failure using FMEA.
Show hintHide hint
Consider the implications and possible contingency plans.

6 more questions in this section. Enroll free to practise them all.