Practice Introduction To Torsion (1) - Torsion and Twist

Practise this section

8 questions

Flashcard drill
4 cards from this section. Quick, good the night before a test.
Exercise
6 questions · about 4 min · pass mark 70%. Hints available.
Sign up to start the exercise
Quiz
2 questions · about 1 min · pass mark 70%. Hints available.
Sign up to start the quiz

6 sample questions

Question 1.
What is torsion?
Show hintHide hint
Think about how twisting affects materials.
Question 2.
Define shear stress.
Show hintHide hint
Consider stress in different directions.
3Question 3.
What describes the angle of twist in a structural member?
- The linear displacement
- The angular displacement
- The shear stress
Show hintHide hint
Remember it measures how much something turns.
4Question 4.
True or False: The polar moment of inertia is not relevant to torsion calculations.
- True
- False
Show hintHide hint
Think about how the shape of an object affects its resistance to twisting.
Question 5.
A solid shaft is subjected to a torque of 150 Nm. Calculate the shear stress if the shaft diameter is 60 mm.
Show hintHide hint
Pay close attention to units for diameter.
Question 6.
A helical spring with 10 active coils and a mean diameter of 30 cm compresses under an axial load of 500 N. Determine the deflection given the wire diameter is 5 mm and shear modulus is 80 GPa.
Show hintHide hint
Make sure to calculate D and d in consistent units.

4 more questions in this section. Enroll free to practise them all.