Practice Theory Of Bending Of Beams (5) - Mechanics of Beams

Practise this section

9 questions

Flashcard drill
4 cards from this section. Quick, good the night before a test.
Exercise
6 questions · about 4 min · pass mark 70%. Hints available.
Sign up to start the exercise
Quiz
3 questions · about 2 min · pass mark 70%. Hints available.
Sign up to start the quiz

6 sample questions

Question 1.
Define homogeneous material.
Show hintHide hint
Think about how the material looks and behaves in all parts.
Question 2.
What is the bending moment?
Show hintHide hint
Consider the force applied and its distance from the pivot point.
3Question 3.
What type of material is assumed to be the same throughout according to beam bending theory?
- Homogeneous
- Inhomogeneous
- Anisotropic
Show hintHide hint
Remember the definition of homogeneous.
4Question 4.
The neutral plane in a beam is where:
- Stress is maximum
- Stress is zero
Show hintHide hint
Think about where tension and compression balance out.
Question 5.
A cantilever beam of length 4 m is subjected to a point load of 2000 N at its free end. Calculate the bending stress at a point 1 m from the fixed end. Assume the moment of inertia is 0.001 m^4.
Show hintHide hint
First, determine the bending moment at that distance.
Question 6.
Discuss the effects on the design of a beam if the assumptions of homogeneous and isotropic materials were not satisfied.
Show hintHide hint
Consider how material inconsistencies can affect structural performance.

5 more questions in this section. Enroll free to practise them all.