Practice Hardware Implementation Of Logic Gates (3.4) - Propositional Logic, Hardware Implementation, and Arithmetic Operations

Practice: Hardware Implementation of Logic Gates

Lesson 3.4Propositional Logic, Hardware Implementation, and Arithmetic Operations

Practise this section

8 questions

Flashcard drill
4 cards from this section. Quick, good the night before a test.
Exercise
5 questions · about 3 min · pass mark 70%. Hints available.
Sign up to start the exercise
Quiz
3 questions · about 2 min · pass mark 70%. Hints available.
Sign up to start the quiz

6 sample questions

Question 1.
What is the output of an AND gate when both inputs are 1?
Show hintHide hint
Think about what the AND gate requires for a true output.
Question 2.
What does the NOT gate do to an input of 0?
Show hintHide hint
Consider what NOT means.
3Question 3.
What output does an OR gate produce for inputs 0 and 1?
- 0
- 1
- Both
Show hintHide hint
What does an OR gate require for a true output?
4Question 4.
True or False: An XOR gate outputs 1 when both inputs are the same.
- True
- False
Show hintHide hint
Consider the rules for XOR gates.
Question 5.
If you have three inputs (A, B, and C), construct a truth table for a logic circuit that uses an AND gate followed by a NOT gate.
Show hintHide hint
Start by filling in the truth table for the AND gate first.
Question 6.
Design a logic circuit using OR and AND gates to represent the condition: 'The system will proceed if either Sensor A is on or both Sensors B and C are on.'
Show hintHide hint
Focus on creating a logical representation that meets the specifications given in the condition.

4 more questions in this section. Enroll free to practise them all.