Practice Total Station Survey Procedures – Step-by-step Field Methodology (12.11)

Practice: Total Station Survey Procedures – Step-by-Step Field Methodology

Lesson 12.11Total Station Surveys

Practise this section

8 questions

Flashcard drill
2 cards from this section. Quick, good the night before a test.
Exercise
6 questions · about 4 min · pass mark 70%. Hints available.
Sign up to start the exercise
Quiz
2 questions · about 1 min · pass mark 70%. Hints available.
Sign up to start the quiz

6 sample questions

Question 1.
What is the purpose of reconnaissance in surveying?
Show hintHide hint
Think about what the surveyor needs to check before starting the survey.
Question 2.
How are control points established?
Show hintHide hint
What can be used as markers?
3Question 3.
What is the primary purpose of reconnaissance in Total Station surveying?
- Data collection
- Identifying control points
- Equipment setup
Show hintHide hint
What stage comes before gathering data?
4Question 4.
True or False: Control points are used only for initial calibration of the Total Station.
- True
- False
Show hintHide hint
Do they just help at the beginning?
Question 5.
You are tasked with surveying a remote area covered in thick vegetation. Describe your detailed plan for ensuring effective data collection despite the challenging surroundings.
Show hintHide hint
What types of measurements could be difficult?
Question 6.
After concluding data collection, you realize the angles measured do not match previously noted values. How would you address this issue systematically?
Show hintHide hint
What is the first step in troubleshooting discrepancies?

4 more questions in this section. Enroll free to practise them all.