Practice Calibration Of Gps Equipment (5.5.3) - Total Station and GPS Surveying

Practice: Calibration of GPS Equipment

Lesson 5.5.3Total Station and GPS Surveying

Practise this section

9 questions

Flashcard drill
4 cards from this section. Quick, good the night before a test.
Exercise
6 questions · about 4 min · pass mark 70%. Hints available.
Sign up to start the exercise
Quiz
3 questions · about 2 min · pass mark 70%. Hints available.
Sign up to start the quiz

6 sample questions

Question 1.
What is a baseline check?
Show hintHide hint
Think about what a reference point might be.
Question 2.
Why is antenna height verification important?
Show hintHide hint
Consider how measurements are made from the ground.
3Question 3.
What is the primary purpose of a baseline check in GPS calibration?
- To update the firmware
- To verify GPS measurements
- To adjust for environmental conditions
Show hintHide hint
Remember why we check measurements initially.
4Question 4.
True or False: Firmware updates are optional for GPS receivers.
- True
- False
Show hintHide hint
Consider how software updates work in other devices.
Question 5.
A surveyor finds that in repeated baseline checks, their GPS receiver consistently reports a distance that is 2 meters shorter than expected. Analyze the potential reasons for this discrepancy and suggest remediation steps.
Show hintHide hint
Consider each component's role in the measurement process.
Question 6.
After updating the GPS receiver's firmware, measurements seem erratic. Propose a troubleshooting approach to resolve these issues, considering environmental conditions and known calibration methods.
Show hintHide hint
Think about how changes can affect device performance.

5 more questions in this section. Enroll free to practise them all.