Practice Purge And Trap Technique For Vocs In Water (1.6) - Introduction to Thermal Desorption

Practice: Purge and Trap Technique for VOCs in Water

Lesson 1.6Introduction to Thermal Desorption

Practise this section

9 questions

Flashcard drill
3 cards from this section. Quick, good the night before a test.
Exercise
6 questions · about 4 min · pass mark 70%. Hints available.
Sign up to start the exercise
Quiz
3 questions · about 2 min · pass mark 70%. Hints available.
Sign up to start the quiz

6 sample questions

Question 1.
What does VOC stand for?
Show hintHide hint
Think about compounds that easily evaporate.
Question 2.
What is the purpose of the Purge phase?
Show hintHide hint
Consider why gas might be preferred.
3Question 3.
What is the primary purpose of the Purge and Trap technique?
- To separate compounds
- To analyze volatile compounds in water
- To cool substances
Show hintHide hint
Think about the specific application of this technique.
4Question 4.
True or False: All gases can be used for purging in the Purge and Trap technique.
- True
- False
Show hintHide hint
Consider what kind of reactions might occur.
Question 5.
You have a water sample with an unknown concentration of VOCs. Describe how would you set up the Purge and Trap process to ensure accurate results.
Show hintHide hint
Consider each phase of the technique.
Question 6.
A lab technician reported loss of VOCs during liquid-liquid extraction. Analyze why using the Purge and Trap technique is more advantageous for this situation.
Show hintHide hint
Look for comparisons between the effectiveness of the methods.

5 more questions in this section. Enroll free to practise them all.