Practice Extraction From Solids (6.1) - Introduction - part B - Environmental Quality Monitoring & Analysis, - Vol 2

Practice: Extraction from Solids

Lesson 6.1Introduction - part B

Practise this section

9 questions

Flashcard drill
3 cards from this section. Quick, good the night before a test.
Exercise
6 questions · about 4 min · pass mark 70%. Hints available.
Sign up to start the exercise
Quiz
3 questions · about 2 min · pass mark 70%. Hints available.
Sign up to start the quiz

6 sample questions

Question 1.
What is a surrogate in analytical chemistry?
Show hintHide hint
Think about substitutes in measurements.
Question 2.
Calculate the mass of surrogate in 1 mL of a 100 mg/L solution.
Show hintHide hint
Use the formula concentration times volume.
3Question 3.
What is the main purpose of using a surrogate in environmental analysis?
- To replace the analyte
- To estimate recovery
- To dilute the sample
Show hintHide hint
What role does a surrogate play in measurements?
4Question 4.
Liquid-liquid extraction involves mixing which types of liquids?
- Soluble liquids
- Immiscible liquids
- Miscible liquids
Show hintHide hint
Think about how the liquids separate after mixing.
Question 5.
Design an extraction strategy for a solid waste sample suspected of containing hazardous organic compounds. Explain your methodology.
Show hintHide hint
Consider porosity, extraction time, and chemical solubility.
Question 6.
What discrepancies might arise when the recovered amount exceeds the amount added during extraction? Provide a detailed analysis.
Show hintHide hint
Think of both systematic and random errors in measurement.

5 more questions in this section. Enroll free to practise them all.