Practice Analysis Methods – Introduction And Water Quality Parameters (2) - Analysis Methods – Introduction and Water Quality Parameters

Practice: Analysis Methods – Introduction and Water Quality Parameters

Lesson 2Analysis Methods – Introduction and Water Quality Parameters

Practise this section

10 questions

Flashcard drill
2 cards from this section. Quick, good the night before a test.
Exercise
6 questions · about 4 min · pass mark 70%. Hints available.
Sign up to start the exercise
Quiz
4 questions · about 3 min · pass mark 70%. Hints available.
Sign up to start the quiz

6 sample questions

Question 1.
What does BOD stand for?
Show hintHide hint
Think about what the test measures.
Question 2.
Why is temperature control important in BOD testing?
Show hintHide hint
Consider how temperature influences living organisms.
3Question 3.
What does BOD measure?
- The total amount of oxygen in water
- The organic matter in water
- The amount of oxygen consumed by microorganisms
- The level of pollutants in air
Show hintHide hint
Focus on what BOD is specifically designed to measure.
4Question 4.
Standard methods are established protocols used in analysis.
- True
- False
Show hintHide hint
Consider whether protocols lead to reliable data.
Question 5.
You conduct a BOD test and find that the initial DO is 8 mg/L and the final DO after 5 days is 0 mg/L. What does this indicate about the organic load present in the sample?
Show hintHide hint
Think about the implications of zero DO in relation to organic matter.
Question 6.
In a situation where your BOD bottle is not sealed properly during the test, what types of errors might you expect in your results?
Show hintHide hint
Consider how oxygen can impact the readings if not controlled.

6 more questions in this section. Enroll free to practise them all.