Practice Monitoring And Analysis (1.1) - Analysis Methods – Gas Chromatography

Practice: Monitoring and Analysis

Lesson 1.1Analysis Methods – Gas Chromatography

Practise this section

9 questions

Flashcard drill
4 cards from this section. Quick, good the night before a test.
Exercise
6 questions · about 4 min · pass mark 70%. Hints available.
Sign up to start the exercise
Quiz
3 questions · about 2 min · pass mark 70%. Hints available.
Sign up to start the quiz

6 sample questions

Question 1.
What is the mobile phase in gas chromatography?
Show hintHide hint
Think about what moves through the chromatography system.
Question 2.
What does the partition constant (K) indicate?
Show hintHide hint
Recall how compounds behave in the column.
3Question 3.
What role does the mobile phase play in gas chromatography?
- Carries the sample through the stationary phase
- Holds the stationary phase in place
- Increases pressure in the column
Show hintHide hint
Remember the definition of the mobile phase.
4Question 4.
Is higher retention time always better in chromatography? (True/False)
- True
- False
Show hintHide hint
Consider the trade-offs in analysis time versus separation quality.
Question 5.
A sample of unknown hydrocarbons is injected into a gas chromatograph. Explain how you would use retention time to identify individual components in the mixture.
Show hintHide hint
Think about how standards help confirm identities.
Question 6.
You notice that increasing flow rate in your gas chromatography setup decreases your separation quality. Discuss why this occurs and offer potential adjustments.
Show hintHide hint
Reflect on the balance between speed and quality.

5 more questions in this section. Enroll free to practise them all.