Practice Development Of Fault Models For Electronic Circuits (7.2)

Practise this section

9 questions

Flashcard drill
5 cards from this section. Quick, good the night before a test.
Exercise
6 questions · about 4 min · pass mark 70%. Hints available.
Sign up to start the exercise
Quiz
3 questions · about 2 min · pass mark 70%. Hints available.
Sign up to start the quiz

6 sample questions

Question 1.
What does a fault model represent?
Show hintHide hint
Think about how testing is done on circuits.
Question 2.
What does SAF stand for?
Show hintHide hint
It's a common type of fault model.
3Question 3.
What is a Stuck-At Fault?
- A fault that changes logic levels
- A fault where a signal stays at a fixed level
- A fault that causes delays
Show hintHide hint
This fault is about being stuck on a level.
4Question 4.
True or False: Transition Faults are significant for detecting timing problems.
- True
- False
Show hintHide hint
Remember how signals should transition.
Question 5.
Design a simple circuit model and identify potential fault models that can apply to it.
Show hintHide hint
Think about common circuit configurations and ways elements can fail.
Question 6.
You have a high-speed amplifier with output oscillating wildly. Determine possible Gain and Offset Faults in this scenario.
Show hintHide hint
Consider how deviations in gain can disrupt output stability.

5 more questions in this section. Enroll free to practise them all.