Practice Finishing Of Concrete (4) - Surface Vibrators - Construction Engineering & Management - Vol 3

Practice: Finishing of Concrete

Lesson 4Surface Vibrators

Practise this section

10 questions

Flashcard drill
4 cards from this section. Quick, good the night before a test.
Exercise
6 questions · about 4 min · pass mark 70%. Hints available.
Sign up to start the exercise
Quiz
4 questions · about 3 min · pass mark 70%. Hints available.
Sign up to start the quiz

6 sample questions

Question 1.
What is the primary purpose of using surface vibrators in concrete?
Show hintHide hint
Think about the limitations of internal vibrators.
Question 2.
Define screeding in the context of concrete finishing.
Show hintHide hint
It is the first step in the finishing process.
3Question 3.
What is the maximum recommended depth for effective use of surface vibrators?
- 150 mm
- 200 mm
- 100 mm
Show hintHide hint
Focus on the limitations of vibrators discussed.
4Question 4.
True or False: Troweling is the first stage of finishing concrete.
- True
- False
Show hintHide hint
Think about the order of operations in finishing.
Question 5.
You are tasked with finishing a thin slab of concrete that has poor workability. Describe how you would choose finishing methods and why, considering timing and equipment.
Show hintHide hint
Reflect on the limitations imposed by workability and thickness.
Question 6.
Analyze the impact of excessive finishing on a concrete slab intended for high-traffic use. What precautions should the workers take while finishing?
Show hintHide hint
Consider the relationship between surface integrity and heavy usage.

6 more questions in this section. Enroll free to practise them all.