Practice Lifting Equipment – Cranes (part 2) (1.1) - Construction Methods and Equipment Management

Practice: Lifting Equipment – Cranes (Part 2)

Lesson 1.1Construction Methods and Equipment Management

Practise this section

9 questions

Flashcard drill
3 cards from this section. Quick, good the night before a test.
Exercise
6 questions · about 4 min · pass mark 70%. Hints available.
Sign up to start the exercise
Quiz
3 questions · about 2 min · pass mark 70%. Hints available.
Sign up to start the quiz

6 sample questions

Question 1.
What is a tower crane?
Show hintHide hint
Think about cranes used in high buildings.
Question 2.
What does the term 'slewing' refer to?
Show hintHide hint
It involves how the crane moves its arm.
3Question 3.
What mechanism allows a tower crane to rotate?
- Base Rotation
- Slewing
- Counterweight
Show hintHide hint
Think about how the crane arm moves.
4Question 4.
True or False: The bottom slewing crane has a higher lifting capacity than top slewing cranes.
- True
- False
Show hintHide hint
Consider the structural differences of the cranes.
Question 5.
Consider a construction project that requires lifting a heavy prefabricated panel 30 meters up. Calculate the required foundation base size if the panel weighs 2000 kg and additional safety factors must be included based on wind speed at the construction site.
Show hintHide hint
Think about how the load and wind factors influence the foundation size.
Question 6.
You are tasked with designing a lifting plan for a site with limited access. Describe how you would select between a luffing boom and a horizontal boom crane.
Show hintHide hint
Consider the flexibility and operational scope needed for project completion.

5 more questions in this section. Enroll free to practise them all.