Loading the lesson
Loading the lesson
Search AllRounder.ai
Search the courses, subjects, tracks, games and features, or jump straight to a page.
Search the courses, subjects, tracks, games and features, or jump straight to a page.
Learn it your way
A short class with Sarah and her students. The other ways are under More.
Sign up free to listen. Transcripts are free to read.
Today, we will discuss maneuver time in bulldozer operations. Can anyone tell me what maneuver time includes?
Is it the time spent while pushing or moving the bulldozer?
Good start! Maneuver time actually refers to adjusting speeds, changing gears, and other operational changes. It's crucial for understanding overall efficiency.
How does it affect cycle time?
Great question! Maneuver time is a part of cycle time, which also includes push and backtrack time. So, if maneuver time increases, the total cycle time increases.
What makes push and backtrack times variable?
They depend on haul distance. The farther you push, the more time it takes. Also, speed can influence this. Remember: Distance affects time!
So, in summary, maneuver time is key to cycle time, and understanding these times helps maximize productivity.
Let’s dive deeper into the components of cycle time. Who can name them?
Push time and backtrack time?
Exactly! And we have maneuver time as the third component. Remember, push time depends on haul distance, and backtrack is usually quicker.
What if the haul distance changes?
Then the push time changes! If the distance is longer, the time will also be longer, and so will the cycle time.
So, to recap, cycle time includes push, backtrack, and maneuver times, and knowing about these helps in optimizing work processes.
Performance charts are essential for calculating machine speed. Can anyone explain how we use them?
We check the total resistance and find the speed from the chart?
Exactly! Once we have speed, we can calculate push time and backtrack time effectively.
What influences total resistance?
Great! It's influenced by terrain conditions. Higher resistance means lower speed. Simplified: Resistance lowers speed!
Let’s now look at how we estimate productivity based on maneuver time.
Is it just about the blade load and cycle time?
That’s part of it! We also factor in job efficiency and soil density. Both affect overall productivity.
What’s job efficiency?
It refers to the actual operating time out of the total available time. If a machine runs for 45 minutes in an hour, that’s 75% efficiency.
In conclusion, estimating productivity involves a mix of understanding cycle times, operating efficiency, and blade load.
The time necessary for speed adjustments and gear changes during bulldozer operation.
The total period for completing a bulldozer operation cycle, incorporating push, backtrack, and maneuver times.
The operational efficiency reflecting actual working minutes of the machine within an hour.
If a bulldozer has a push time of 2 minutes, a backtrack time of 1 minute, and a maneuver time of 0.1 minutes, the total cycle time would be 3.1 minutes.
In a project with a long haul distance of 100 meters, if the bulldozer travels at a speed of 10 meters per minute, the push time is 10 minutes, and if backtrack is generally half of that, it would then be 5 minutes.
Push it, track back, speed adjust, cycle time in earth-moving is a must!
Imagine a bulldozer as a diligent worker. Each time it must push through earth, it checks its speed (maneuver time) to ensure it doesn’t get tired too quickly; then it runs back to its starting line without loads waiting to push again!
Remember 'PMC' – Push, Maneuver, Cycle as the key components of bulldozer operations.
Cycle Time = P + B + M, where P is Push Time, B is Backtrack Time, and M is Maneuver Time.
Term
Push Time
Click to flip
Term
Cycle Time
Click to flip
Term
Job Efficiency
Click to flip
The total time required for a bulldozer to complete one full operation cycle, including push, backtrack, and maneuver times.
The time taken to push material from the original position to a dumping point.
The time required for a bulldozer to return to its starting point after moving material.
The time spent by the operator to adjust speeds or change gears during bulldozer operations.
A tool used to determine machine speed based on total resistance and operating conditions.
The ratio of actual working time of the machine to the total operational time available.
This section explains the concept of maneuver time in bulldozer operations, detailing how it affects cycle time and productivity.
Maneuver time is the period spent changing gears or adjusting machine speed while operating a bulldozer. This section discusses how maneuver time combines with other components of cycle time, including push time and backtrack time, which depend on haul distances and machine speed, to inform productivity estimates.
Maneuver time in bulldozer operations is crucial for understanding the efficiency of earth-moving projects. It includes the time taken to adjust speeds, change gears, and perform other operational adjustments that improve the overall effectiveness of machine use. This section delves into how maneuver time influences cycle time and productivity.
To calculate push and backtrack times, operators must know travel distance and machine speed. Using performance charts, speed can be determined based on total rolling resistance and grade resistance at a work site.
Estimating bulldozer productivity involves understanding the blade load and overall cycle time, while also accounting for factors such as job efficiency and soil density. The section explains different estimation methods, including direct calculations based on operator data and thumb rules provided by manufacturers.
Understanding maneuver time and its implications is critical for accurate productivity assessments, allowing operators to optimize machine operations effectively.