Practice Testing Of Admixtures And Admixtured Concrete (8) - Chemical and Mineral Admixtures

Practice: Testing of Admixtures and Admixtured Concrete

Lesson 8Chemical and Mineral Admixtures

Practise this section

8 questions

Flashcard drill
2 cards from this section. Quick, good the night before a test.
Exercise
6 questions · about 4 min · pass mark 70%. Hints available.
Sign up to start the exercise
Quiz
2 questions · about 1 min · pass mark 70%. Hints available.
Sign up to start the quiz

6 sample questions

Question 1.
What does the Setting Time Test measure?
Show hintHide hint
Think about what happens when concrete starts changing from liquid to solid.
Question 2.
What is the purpose of the workability test?
Show hintHide hint
Consider the smoothness of the mixing process.
3Question 3.
What does the Setting Time Test primarily measure?
- Slump retention
- Time for setting
- Compressive strength
Show hintHide hint
Focus on the process of changing states from wet to solid.
4Question 4.
True or False: The Pozzolanic Activity Index indicates how a pozzolan reacts with water.
- True
- False
Show hintHide hint
Think about what makes pozzolans valuable in concrete.
Question 5.
Calculate the compressive strength required if a structural element needs to support a load of 100 kN over a cross-sectional area of 0.5 m². What is the minimum strength required?
Show hintHide hint
Remember the basic formula for stress.
Question 6.
Discuss how temperature fluctuations might alter the results of admixture tests—what adjustments could be made during testing?
Show hintHide hint
Think about how heat affects chemical reactions in general.

4 more questions in this section. Enroll free to practise them all.