Practice Comparison Of Bus Architectures (31.2.2) - Memory and Bus Architecture

Practice: Comparison of Bus Architectures

Lesson 31.2.2Memory and Bus Architecture

Practise this section

10 questions

Flashcard drill
4 cards from this section. Quick, good the night before a test.
Exercise
6 questions · about 4 min · pass mark 70%. Hints available.
Sign up to start the exercise
Quiz
4 questions · about 3 min · pass mark 70%. Hints available.
Sign up to start the quiz

6 sample questions

Question 1.
Name two types of bus architectures.
Show hintHide hint
Think about the terms we've discussed.
Question 2.
What does MDR stand for?
Show hintHide hint
What do we call the register that stores data temporarily?
3Question 3.
What is the primary advantage of a three bus architecture?
- Less complexity
- Higher data transfer capacity
- Cheaper implementation
Show hintHide hint
Consider the number of buses involved.
4Question 4.
True or False: A single bus architecture can handle more simultaneous data transfers than a three bus architecture.
- True
- False
Show hintHide hint
Think about how many paths for data each architecture has.
Question 5.
Given a scenario where both architectures are tasked with executing the instruction 'R1 = R2 + R3', analyze and compare the cycle time for each.
Show hintHide hint
Think about the number of operations each architecture needs to complete.
Question 6.
Design a flowchart showing the data transfer from the MDR to R1 using both architectures and discuss the differences in control signal management.
Show hintHide hint
Sketch clarity in your flow representation.

6 more questions in this section. Enroll free to practise them all.