Practice Jk Flip Flop (6.1.3) - Basic Building Blocks of Latch and Flip Flop

Practise this section

8 questions

Flashcard drill
2 cards from this section. Quick, good the night before a test.
Exercise
6 questions · about 4 min · pass mark 70%. Hints available.
Sign up to start the exercise
Quiz
2 questions · about 1 min · pass mark 70%. Hints available.
Sign up to start the quiz

6 sample questions

Question 1.
What happens when both J and K are 0?
Show hintHide hint
Think about retaining the current state.
Question 2.
If J is 1 and K is 0, what will the output be?
Show hintHide hint
Consider the setting function of J.
3Question 3.
When J = 0 and K = 0, what is the output?
- It toggles
- It sets to 1
- No change
Show hintHide hint
Think about what it means to keep the same state.
4Question 4.
True or False: The output of JK Flip Flop can only be set or reset.
- True
- False
Show hintHide hint
Consider all functions provided by J and K.
Question 5.
You are designing a digital circuit using a JK Flip Flop. What configuration of J and K would allow the output to continuously toggle?
Show hintHide hint
What happens when both inputs receive a high signal?
Question 6.
Design a timing diagram for the JK Flip Flop over four clock cycles with inputs J = 1, K = 1 for the first two cycles and J = 0, K = 1 for the last two cycles. Explain the state changes.
Show hintHide hint
Chart out each clock cycle’s output step by step.

4 more questions in this section. Enroll free to practise them all.