Practice Computer-aided Design Optimization (5) - Design Optimization - Computer Aided Design & Analysis

Practice: Computer-Aided Design Optimization

Lesson 5Design Optimization

Practise this section

10 questions

Flashcard drill
5 cards from this section. Quick, good the night before a test.
Exercise
6 questions · about 4 min · pass mark 70%. Hints available.
Sign up to start the exercise
Quiz
4 questions · about 3 min · pass mark 70%. Hints available.
Sign up to start the quiz

6 sample questions

Question 1.
What is the primary purpose of design optimization?
Show hintHide hint
Think about the factors we aim to balance in design.
Question 2.
What does a Primary Design Equation (PDE) express?
Show hintHide hint
Consider what we want to maximize or minimize.
3Question 3.
What is the aim of design optimization?
- Only to reduce cost
- To find the best possible design solution
- To make designs look good
Show hintHide hint
Think about all the factors involved in design.
4Question 4.
True or False: Subsidiary design equations only address the primary objective of optimization.
- True
- False
Show hintHide hint
Consider what SDEs actually do.
Question 5.
An automotive engineer is tasked with designing a lightweight frame for a new car model. Given that the primary goal is to reduce weight without sacrificing safety, what design equations would you formulate? Discuss the primary and subsidiary equations that will guide your design process.
Show hintHide hint
Think about how weight affects overall performance and which constraints keep it safe.
Question 6.
You are designing a drone that must weigh less than 2 kg while having a load capacity of at least 3 kg. Identify the conflicting constraints and how you would approach optimizing the design. What approaches might you take to resolve these conflicts?
Show hintHide hint
Analyze how material choice can impact both weight and load capacity.

6 more questions in this section. Enroll free to practise them all.