Practice Cmos Nand And Nor Gates (6.3) - Digital CMOS Logic Design - Part 1: Principles of Digital CMOS Logic Gates

Practice: CMOS NAND and NOR Gates

Lesson 6.3Digital CMOS Logic Design - Part 1: Principles of Digital CMOS Logic Gates

Practise this section

9 questions

Flashcard drill
3 cards from this section. Quick, good the night before a test.
Exercise
6 questions · about 4 min · pass mark 70%. Hints available.
Sign up to start the exercise
Quiz
3 questions · about 2 min · pass mark 70%. Hints available.
Sign up to start the quiz

6 sample questions

Question 1.
What is the output of a NAND gate with inputs (1, 1)?
Show hintHide hint
Think of the condition where the NAND gate turns off.
Question 2.
What output does a NOR gate provide when both inputs are (1, 0)?
Show hintHide hint
Recall the condition of having at least one input high.
3Question 3.
What is the output of a NAND gate with inputs (1, 1)?
- 1
- 0
- Error
Show hintHide hint
Think of the gate's operational condition.
4Question 4.
A NOR gate outputs high when:
- True
- False
Show hintHide hint
Remember its logic definition.
Question 5.
Design a simple digital circuit that uses only NAND gates to perform the function of a NOT gate. Explain your design.
Show hintHide hint
Consider how you can force the same input through the use of multiple gates.
Question 6.
Construct a digital logic circuit that simulates an XOR function using only NAND gates. Provide a truth table for your circuit.
Show hintHide hint
Think of how inputs interact to yield the desired output.

5 more questions in this section. Enroll free to practise them all.