Practice Compression Test (parallel And Perpendicular To Grain) (7.2.a) - Introduction

Practice: Compression Test (Parallel and Perpendicular to Grain)

Lesson 7.2.aIntroduction

Practise this section

9 questions

Flashcard drill
3 cards from this section. Quick, good the night before a test.
Exercise
6 questions · about 4 min · pass mark 70%. Hints available.
Sign up to start the exercise
Quiz
3 questions · about 2 min · pass mark 70%. Hints available.
Sign up to start the quiz

6 sample questions

Question 1.
What does the compression test measure?
Show hintHide hint
Think about what happens to wood under weight.
Question 2.
What are the two orientations for conducting a compression test?
Show hintHide hint
Consider the direction of the wood fibers.
3Question 3.
What is the purpose of the compression test?
- To measure weight
- To assess load-bearing capacity
- To evaluate aesthetic qualities
Show hintHide hint
Think about what happens when weight is placed on wood.
4Question 4.
The compression test is performed in which orientations?
- True
- False
Show hintHide hint
Consider how load could be applied in different ways.
Question 5.
A beam made of pine wood is tested under compression parallel to the grain and shows a load-bearing capacity of 1500N. If another beam is tested perpendicular to the grain and shows a load capacity of 800N, what could this imply about the use of wood in different structural scenarios?
Show hintHide hint
Consider how forces interact with the grain structure.
Question 6.
Evaluate how varying moisture content in wood could alter the outcomes of compression tests conducted both parallel and perpendicular to grain. Suggest methods to mitigate these effects.
Show hintHide hint
Think about how water changes a material's strength properties.

5 more questions in this section. Enroll free to practise them all.