Practice Stress-strain Curve In Compression (2.1) - Failure Mechanism in Hardened Concrete

Practice: Stress-Strain Curve in Compression

Lesson 2.1Failure Mechanism in Hardened Concrete

Practise this section

10 questions

Flashcard drill
3 cards from this section. Quick, good the night before a test.
Exercise
6 questions · about 4 min · pass mark 70%. Hints available.
Sign up to start the exercise
Quiz
4 questions · about 3 min · pass mark 70%. Hints available.
Sign up to start the quiz

6 sample questions

Question 1.
What does the initial linear portion of the stress-strain curve represent?
Show hintHide hint
Think about how materials usually respond to loads.
Question 2.
Define ultimate compressive strength.
Show hintHide hint
What is the key limit we assess in concrete design?
3Question 3.
What is the general shape of the stress-strain curve in compression?
- Linear throughout
- Linear then non-linear
- Constant
Show hintHide hint
Think about how materials typically respond to loads.
4Question 4.
True or False: The ultimate compressive strength is the only factor we consider for concrete performance.
- True
- False
Show hintHide hint
Examine if there are other variables involved.
Question 5.
Given a concrete column with a known Modulus of Elasticity, calculate the expected stress at a strain of 0.0025. The ultimate compressive strength is 30 MPa.
Show hintHide hint
You will need to use concrete's characteristics to plug values into the modulus equation.
Question 6.
Analyze the potential failure mechanism in a structure designed with lower than necessary ultimate compressive strength. What consequences might arise?
Show hintHide hint
Consider the implications of inadequate material strength on structural safety.

6 more questions in this section. Enroll free to practise them all.