Practice Test Specimens (1.4) - Compressive Strength Test - Civil Engineering Materials, Testing & Evaluation - Vol 1

Practice: Test Specimens

Lesson 1.4Compressive Strength Test

Practise this section

8 questions

Flashcard drill
2 cards from this section. Quick, good the night before a test.
Exercise
6 questions · about 4 min · pass mark 70%. Hints available.
Sign up to start the exercise
Quiz
2 questions · about 1 min · pass mark 70%. Hints available.
Sign up to start the quiz

6 sample questions

Question 1.
What are the dimensions of a cube specimen?
Show hintHide hint
Think about standard dimensions for testing.
Question 2.
Why is proper curing important?
Show hintHide hint
Consider what hydration means for concrete.
3Question 3.
What is the size of a standard cube specimen used for compressive testing?
- 150 mm x 150 mm x 150 mm
- 200 mm x 200 mm x 200 mm
- 100 mm x 100 mm x 100 mm
Show hintHide hint
Remember the specific dimensions mentioned.
4Question 4.
True or False: Proper curing of concrete is critical to prevent structural failure.
- True
- False
Show hintHide hint
Think about the role of water in concrete curing.
Question 5.
If a cube specimen was found to have three air pockets, how would this affect the results of a compressive strength test?
Show hintHide hint
Consider how structural imperfections can influence test outcomes.
Question 6.
You have a mix of two types of concrete, one with high water-cement ratio and one with a lower ratio. Discuss how this might affect the test results of both cylinder and cube specimens.
Show hintHide hint
Think about the water-cement ratio’s impact on overall concrete quality.

4 more questions in this section. Enroll free to practise them all.