Practice Drawing Standard Sections For Rcc Beams (11.2) - Exercises in Computer Aided Building Planning and Drawing (BCV305)

Practice: Drawing standard sections for RCC Beams

Lesson 11.2Exercises in Computer Aided Building Planning and Drawing (BCV305)

Practise this section

9 questions

Flashcard drill
3 cards from this section. Quick, good the night before a test.
Exercise
6 questions · about 4 min · pass mark 70%. Hints available.
Sign up to start the exercise
Quiz
3 questions · about 2 min · pass mark 70%. Hints available.
Sign up to start the quiz

6 sample questions

Question 1.
What does RCC stand for?
Show hintHide hint
Think about concrete that is strengthened with steel.
Question 2.
What is the primary purpose of stirrups in RCC beams?
Show hintHide hint
Remember their role in ensuring proper support.
3Question 3.
What is the primary function of reinforcement in RCC beams?
- To reduce weight
- To increase tensile strength
- To decrease cost
Show hintHide hint
Focus on the properties of concrete.
4Question 4.
True or False: Cantilever beams are supported at both ends.
- True
- False
Show hintHide hint
Visualize how a cantilever beam extends.
Question 5.
Given a rectangular beam size of 300mm x 600mm with a central point load, design the required reinforcement for both tension and compression zones.
Show hintHide hint
Consider factors like moment of resistance and safety factors!
Question 6.
A cantilever beam with a 3m extension is subjected to a point load of 20kN at the free end. Calculate the shear and moment at the fixed support.
Show hintHide hint
Remember the moment caused by a force is force times distance!

5 more questions in this section. Enroll free to practise them all.