Practice Trim And Extend (14.3.4) - Computer-Aided Drafting (CAD) in Civil Engineering

Practice: Trim and Extend

Lesson 14.3.4Computer-Aided Drafting (CAD) in Civil Engineering

Practise this section

10 questions

Flashcard drill
2 cards from this section. Quick, good the night before a test.
Exercise
6 questions · about 4 min · pass mark 70%. Hints available.
Sign up to start the exercise
Quiz
4 questions · about 3 min · pass mark 70%. Hints available.
Sign up to start the quiz

6 sample questions

Question 1.
What does the Trim command do?
Show hintHide hint
Think about what happens when you cut off pieces.
Question 2.
Explain what the Extend command does in CAD.
Show hintHide hint
Consider what happens when you stretch something to touch another.
3Question 3.
What does the Trim command do in CAD?
- Removes sections of a drawing
- Extends lines
- Recolors lines
Show hintHide hint
Think about cleaning up your drawing.
4Question 4.
True or False: The Extend command can be used to trim parts of a drawing.
- True
- False
Show hintHide hint
Remember the purposes of each command.
Question 5.
In a drawing depicting a park layout, lines for paths are overlapping with trees' outlines. How would you use Trim and Extend in this scenario?
Show hintHide hint
Visualize all elements and how they interact with each other.
Question 6.
Create a CAD design of a simple room layout. Reflect on how you would use Trim and Extend to keep walls and doors aligned.
Show hintHide hint
Consider the relationship between each part of your layout.

6 more questions in this section. Enroll free to practise them all.