Practice Offset Command (2.4.4) - Computer Aided Building Planning And Drawing (BCV305)

Practice: OFFSET COMMAND

Lesson 2.4.4Computer Aided Building Planning And Drawing (BCV305)

Practise this section

9 questions

Flashcard drill
2 cards from this section. Quick, good the night before a test.
Exercise
6 questions · about 4 min · pass mark 70%. Hints available.
Sign up to start the exercise
Quiz
3 questions · about 2 min · pass mark 70%. Hints available.
Sign up to start the quiz

6 sample questions

Question 1.
What command do you use to create an offset in AutoCAD?
Show hintHide hint
What do you type to start the command?
Question 2.
What do you need to specify after initiating the OFFSET command?
Show hintHide hint
What comes after you type the command?
3Question 3.
What is the command to initiate an OFFSET in AutoCAD?
- A. O
- B. OFFSET
- C. Both
Show hintHide hint
Think about the two ways you can start the command.
4Question 4.
True or False: The OFFSET command can only create objects to the left of the original.
- True
- False
Show hintHide hint
Consider the flexibility of the command.
Question 5.
Create a drawing that requires three walls offset from a central line. How will you determine the necessary distance for the offsets?
Show hintHide hint
Use the width of the walls to help you set your offsets.
Question 6.
Imagine you're designing a circular feature, and your goal is to create a pathway that is uniformly 4 units from it. How could you adapt the OFFSET command?
Show hintHide hint
Think about how a circular shape interacts with the concept of offsetting.

5 more questions in this section. Enroll free to practise them all.