Practice Step 2: Create Walls Using Line Or Polyline (1.4.2) - Capstone Project: 2BHK Residential Floor Plan in AutoCAD

Practice: Step 2: Create Walls Using Line or Polyline

Lesson 1.4.2Capstone Project: 2BHK Residential Floor Plan in AutoCAD

Practise this section

8 questions

Flashcard drill
2 cards from this section. Quick, good the night before a test.
Exercise
6 questions · about 4 min · pass mark 70%. Hints available.
Sign up to start the exercise
Quiz
2 questions · about 1 min · pass mark 70%. Hints available.
Sign up to start the quiz

6 sample questions

Question 1.
What is the purpose of the RECTANGLE command in AutoCAD?
Show hintHide hint
Think about what shapes you create with this command.
Question 2.
How thick should the walls be in the 2BHK plan?
Show hintHide hint
Recall the default thickness mentioned in the instructions.
3Question 3.
What command is used to create the outer dimensions of a house?
- LINE
- RECTANGLE
- OFFSET
Show hintHide hint
Think about how you would draw the shape initially.
4Question 4.
True or False: To create wall thickness, the OFFSET command is essential.
- True
- False
Show hintHide hint
Consider how multiple lines can relate to each other.
Question 5.
Create a floor plan with three distinct areas: Bedroom, Kitchen, and Living Room. Dimension all walls accurately, ensuring at least one open space.
Show hintHide hint
Check for realistic dimensions as you lay out each section.
Question 6.
Modify a layout based on feedback suggesting the kitchen must be larger and more accessible from the living room.
Show hintHide hint
Visualize the flow of movement between rooms.

4 more questions in this section. Enroll free to practise them all.