Practice Output Swing Analysis (52.2.4) - Common Base and Common Gate Amplifiers (Contd.) : Numerical Examples (Part B)

Practice: Output Swing Analysis

Lesson 52.2.4Common Base and Common Gate Amplifiers (Contd.) : Numerical Examples (Part B)

Practise this section

8 questions

Flashcard drill
2 cards from this section. Quick, good the night before a test.
Exercise
6 questions · about 4 min · pass mark 70%. Hints available.
Sign up to start the exercise
Quiz
2 questions · about 1 min · pass mark 70%. Hints available.
Sign up to start the quiz

6 sample questions

Question 1.
What is the purpose of a common base amplifier?
Show hintHide hint
Think about its basic function.
Question 2.
What voltage drop occurs if the resistance is 6kΩ and current is 0.5mA?
Show hintHide hint
Use Ohm’s Law: V = I * R.
3Question 3.
What is the main function of a common base amplifier?
- Voltage Amplification
- Current Amplification
- Both
Show hintHide hint
Recall the input-output relationship nuances.
4Question 4.
True or False: The output swing of a common base amplifier is directly influenced by base voltage.
- True
- False
Show hintHide hint
Think of the operational boundaries set up by bias.
Question 5.
Given a common base amplifier with a supply voltage of 10V, 100kΩ resistors, and a load of 6kΩ, find the output current when the input voltage is a sinusoidal wave of 1V peak.
Show hintHide hint
Compare peak values and their effects on output thresholds.
Question 6.
Design a practical amplifier circuit that maintains the collector current at 0.5mA with defined load resistance. What parameters must you calculate to optimize performance?
Show hintHide hint
Pay attention to how biasing affects these parameters in practical scenarios.

4 more questions in this section. Enroll free to practise them all.