Practice Practical Method Of Finding Solution (6.1.3) - Analysis of Simple Non - linear Circuit (Contd.) - Part B

Practice: Practical Method of Finding Solution

Lesson 6.1.3Analysis of Simple Non - linear Circuit (Contd.) - Part B

Practise this section

9 questions

Flashcard drill
4 cards from this section. Quick, good the night before a test.
Exercise
6 questions · about 4 min · pass mark 70%. Hints available.
Sign up to start the exercise
Quiz
3 questions · about 2 min · pass mark 70%. Hints available.
Sign up to start the quiz

6 sample questions

Question 1.
What is a pull-up characteristic?
Show hintHide hint
Think about connections to power sources.
Question 2.
What does the iterative method do?
Show hintHide hint
Remember how we improve guesses in steps.
3Question 3.
What does the pull-up characteristic relate to?
- Ground connections
- Higher voltage connections
- Neutral connections
Show hintHide hint
Think of which direction the current flows.
4Question 4.
Is the iterative method only applicable to linear circuits?
- True
- False
Show hintHide hint
Consider the nature of complexity in circuits.
Question 5.
Given a diode circuit, apply the iterative method to find the voltage across the diode. Use an initial guess of 0.7V.
Show hintHide hint
Start with your guess and check the current and voltage relation.
Question 6.
Design a small signal equivalent circuit for a diode operating at 1V with a dynamic resistance of 20Ω. Calculate its response to a small input signal.
Show hintHide hint
Focus on the small variations from the operating point.

5 more questions in this section. Enroll free to practise them all.