Practice Comparison With Bjt Circuits (17.4) - Analysis of simple non - linear circuit containing a MOSFET (Contd.)

Practice: Comparison with BJT Circuits

Lesson 17.4Analysis of simple non - linear circuit containing a MOSFET (Contd.)

Practise this section

8 questions

Flashcard drill
2 cards from this section. Quick, good the night before a test.
Exercise
6 questions · about 4 min · pass mark 70%. Hints available.
Sign up to start the exercise
Quiz
2 questions · about 1 min · pass mark 70%. Hints available.
Sign up to start the quiz

6 sample questions

Question 1.
What does MOSFET stand for?
Show hintHide hint
Think about the components of the name.
Question 2.
In what region does the MOSFET current remain constant despite changes in voltage?
Show hintHide hint
Recall how the voltage affects current in MOSFETs.
3Question 3.
What does the gain of a MOSFET depend on?
- Transconductance and load resistance
- Only load resistance
- Transconductance alone
Show hintHide hint
Remember the components of the gain formula.
4Question 4.
True or False: MOSFETs operate based on current control.
- True
- False
Show hintHide hint
Recall the main principle of how MOSFETs function.
Question 5.
Given a circuit with Vdd = 15V, Rd = 2kΩ, and K = 5mA/V². If Vth = 1V and Vgs = 5V, find the output voltage, and check the operation region.
Show hintHide hint
Remember to verify the operating condition before finalizing Vout.
Question 6.
Design a circuit with a MOSFET that can amplify a small AC signal superimposed on DC. Specify component values to achieve a gain of 10.
Show hintHide hint
Use the formula for gain to set your Rd and determine necessary Id.

4 more questions in this section. Enroll free to practise them all.